GRX Technology Co, Ltd
EVBL2171-J-00A 2.5-5.5V, 1A Step-Down Switch-Mode Converter Evaluation Board TSOT23
EVBL2171-J-00A 2.5-5.5V, 1A Step-Down Switch-Mode Converter Evaluation Board TSOT23

EVBL2171-J-00A 2.5-5.5V, 1A Step-Down Switch-Mode Converter Evaluation Board TSOT23

Share
pMPS EVBL2171-J-00A — Step-Down Switch-Mode Converter Evaluation Board, 2.5-5.5V input, 1 A output, TSOT23./p
    [email protected]
    Previous
    EVBL4415A-QB-00A 4-36V, 1.5A Synchronous Step-Down Converter Evaluation Board QFN-13
    MPSStep-DownTSOT23Power ManagementConverterEvaluation Boards
    • Product Details
    • Download

    EVBL2171-J-00A 2.5-5.5V, 1A Step-Down Switch-Mode Converter Evaluation Board TSOT23

    The MPS EVBL2171-J-00A is an evaluation board built around the MP2171 for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 5.5 V input, is rated for 1 A and switches at 2.6 MHz. The board carries the device in its TSOT23 package.

    The EVBL2171-J-00A is an evaluation board designed to demonstrate the MP2171 and the MPQ2171 (MPQ2171 NRFND, Refer to MPQ2177).

    Key Specifications

    Part NumberEVBL2171-J-00A
    Board ForMP2171
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Switch-Mode Converter Evaluation Board
    Input Voltage2.5 V to 5.5 V
    Current Rating1 A
    Switching Frequency2.6 MHz
    Quiescent Current40 µA
    PackageTSOT23
    Ordering CodesEVBL2171-J-00A

    Features

    • Wide 2.5V to 5.5V Operating Input Voltage (VIN) Range
    • Up to 1A Output Current (IOUT)
    • 40μA Quiescent Current (IQ)
    • 90mΩ and 50mΩ Internal Power MOSFETs
    • 2.6MHz Default Switching Frequency (fSW) with 3.3V Input and 1.8V Output
    • Enable (EN) and Power Good (PG) for Power Sequencing
    • Stable with Low ESR Ceramic Output Capacitors
    • Internal Soft Start (SS)
    • Cycle by Cycle Over-Current Protection (OCP)
    • Shutdown Auto-Discharge

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVBL2171-J-00A support?
    2.5 V to 5.5 V. The rated output is 1 A.
    Which package and ordering codes apply to the EVBL2171-J-00A?
    TSOT23; order codes include EVBL2171-J-00A.
    What are the defining features of the EVBL2171-J-00A?
    Wide 2.5V to 5.5V Operating Input Voltage (VIN) Range Up to 1A Output Current (IOUT)

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products

    MPQ4348-AEC1 3.3-36V, 5A, 350kHz Synchronous Step-Down Converter QFN-17

    MPQ4348-AEC1 3.3-36V, 5A, 350kHz Synchronous Step-Down Converter QFN-17

    MPS MPQ4348-AEC1 — synchronous step-down converter, 3.3-36V input, 5A output, 350 kHz, QFN-17.
    EVMPC22163-2891-Split-02A 130A Two-Phase Intelli-ModuleTM Evaluation Board LGA-72

    EVMPC22163-2891-Split-02A 130A Two-Phase Intelli-ModuleTM Evaluation Board LGA-72

    MPS EVMPC22163-2891-Split-02A — Two-Phase Intelli-ModuleTM, 130 A output, LGA-72.
    TOLL TMI8876/Q H-bridge Motor Driver with Integrated Current Sense and Regulation

    TOLL TMI8876/Q H-bridge Motor Driver with Integrated Current Sense and Regulation

    TOLL TMI8876/Q — brushed dc motor driver, HTSSOP16, 4.5 V.
    MPQ5077A-AEC1 1.2-5.5V, 7A Low-RDS(ON) Load Switch QFN-13

    MPQ5077A-AEC1 1.2-5.5V, 7A Low-RDS(ON) Load Switch QFN-13

    MPS MPQ5077A-AEC1 — Low-RDS(ON) Load Switch, 1.2-5.5V input, 7 A output, QFN-13, AEC-Q100.
    MPQ4430 3.3-36V, 3.5A, 350kHz Step-Down Converter QFN-16

    MPQ4430 3.3-36V, 3.5A, 350kHz Step-Down Converter QFN-16

    MPS MPQ4430 — step-down converter, 3.3-36V input, 3.5A output, 350 kHz, QFN-16.
    TOLL TMI85120 16V Low-Noise Single-Coil Motor Driver

    TOLL TMI85120 16V Low-Noise Single-Coil Motor Driver

    TOLL TMI85120 — single-phase bldc motor driver, 16 V.
    MPQ8634B 2.85-16V, 20A, 600kHz Step-Down Converter QFN-21

    MPQ8634B 2.85-16V, 20A, 600kHz Step-Down Converter QFN-21

    MPS MPQ8634B — step-down converter, 2.85-16V input, 20A output, 600 kHz, QFN-21.
    EVKT-MP2662 USER GUIDE – MP2662 EVALUATION KIT (EVKT-MP2662) MP2662 Evaluation Evaluation Board

    EVKT-MP2662 USER GUIDE – MP2662 EVALUATION KIT (EVKT-MP2662) MP2662 Evaluation Evaluation Board

    MPS EVKT-MP2662 — USER GUIDE – MP2662 EVALUATION KIT (EVKT-MP2662) MP2662 Evaluation.
    MP3433GQ-Z 2.8-17V, 20A, 600kHz Synchronous Boost Converter QFN-16

    MP3433GQ-Z 2.8-17V, 20A, 600kHz Synchronous Boost Converter QFN-16

    MPS MP3433GQ-Z — Synchronous Boost Converter, 2.8-17V input, 20 A output, QFN-16.
    EV9361DJ-00A 5V High Performance Regulated Charge Pump Evaluation Board TSOT23

    EV9361DJ-00A 5V High Performance Regulated Charge Pump Evaluation Board TSOT23

    MPS EV9361DJ-00A — High Performance Regulated Charge Pump Evaluation Board, 5V input, TSOT23.