GRX Technology Co, Ltd
EVHR1211-Y-01A 34A Digital Controller Evaluation Board SOIC
EVHR1211-Y-01A 34A Digital Controller Evaluation Board SOIC

EVHR1211-Y-01A 34A Digital Controller Evaluation Board SOIC

Share
pMPS EVHR1211-Y-01A — Digital Controller, 34 A output, SOIC./p
    [email protected]
    Previous
    EV6631-L-00A 3A Peak Phase Current 3-Phase BLDC Motor Driver Evaluation Board QFN-26
    MPSSOICControllerPower ManagementEvaluation Boards
    • Product Details
    • Download

    EVHR1211-Y-01A 34A Digital Controller Evaluation Board SOIC

    The MPS EVHR1211-Y-01A is an evaluation board for bench characterisation of the device in its intended topology. It is rated for 34 A. The board carries the device in its SOIC package.

    The EVHR1211-Y-01A evaluation board is designed to demonstrate the capabilities of the HR1211, a high performance, multi-mode PFC and current mode LLC combo digital controller.

    Key Specifications

    Part NumberEVHR1211-Y-01A
    FunctionDigital Controller
    Current Rating34 A
    PackageSOIC
    Ordering CodesEVHR1211-Y-01A

    Features

    • General System Features: o Smart X-Capacitor Discharge during AC Dropout, Approved by IEC62368 and IEC60950 o User-Friendly Parameter Configurations and GUI

    Evaluation Board

    EVHR1211-Y-01A evaluation board
    EVHR1211-Y-01A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    Which package and ordering codes apply to the EVHR1211-Y-01A?
    SOIC; order codes include EVHR1211-Y-01A.
    What are the defining features of the EVHR1211-Y-01A?
    General System Features: o Smart X-Capacitor Discharge during AC Dropout, Approved by IEC62368 and IEC60950 o User-Friendly Parameter Configurations and GUI

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products

    Chipanalog CA-IS3822LG Digital Isolator

    Chipanalog CA-IS3822LG Digital Isolator

    CA-IS3822LG — Digital Isolator by Chipanalog (Chip Analog Microelectronics). Signal Rate
    Chipanalog CA-IS3092W Isolated Interface IC

    Chipanalog CA-IS3092W Isolated Interface IC

    The CA-IS309x family of devices is galvanically-isolated RS-485 transceivers with built-in isolated DC-DC converter, that eliminates the need for a separate isolated power supply in space constrained isolated designs. Al
    EV2908A-F-02A Current Mode Synchronous Step-Down Controller Evaluation Board TSSOP20

    EV2908A-F-02A Current Mode Synchronous Step-Down Controller Evaluation Board TSSOP20

    MPS EV2908A-F-02A — Current Mode Synchronous Step-Down Controller Evaluation Board, TSSOP20.
    TBMA302-Q-RD-01A Test Board

    TBMA302-Q-RD-01A Test Board

    MPS TBMA302-Q-RD-01A — Test Board.
    MPQ4263-AEC1 3.6-36V, 280kHz Buck-Boost Converter QFN-20

    MPQ4263-AEC1 3.6-36V, 280kHz Buck-Boost Converter QFN-20

    MPS MPQ4263-AEC1 — buck-boost converter, 3.6-36V input, 280 kHz, QFN-20.
    Chipanalog CA-IF1033S Interface IC

    Chipanalog CA-IF1033S Interface IC

    This CAN transceiver series complies with the ISO 11898-2 (2016) CAN (Controller Area Network) physical layer standard and can be directly connected to 3.3V other controllers with CAN control protocol for use. The CA-IF1
    EV6604C-V-00A 2.5A Simple Dual H-Bridge Driver (HS/LS) Evaluation Board QFN-28

    EV6604C-V-00A 2.5A Simple Dual H-Bridge Driver (HS/LS) Evaluation Board QFN-28

    MPS EV6604C-V-00A — Simple Dual H-Bridge Driver (HS/LS) Evaluation Board, 2.5 A output, QFN-28.
    MP5077 0.5-5.5V, 7A Low RDSON Load Switch With Programmable Current Limit QFN-12

    MP5077 0.5-5.5V, 7A Low RDSON Load Switch With Programmable Current Limit QFN-12

    MPS MP5077 — Low RDSON Load Switch With Programmable Current Limit, 0.5-5.5V input, 7 A output, QFN-12.
    TOLL TMI6240 18V, 50mΩ R ds(on) Power Switch with Programmable Soft-start

    TOLL TMI6240 18V, 50mΩ R ds(on) Power Switch with Programmable Soft-start

    TOLL TMI6240 — high-side power switch with programmable soft start, SOT23-5, 18 V.
    MPQ18021HN-A 2.5A Half-Bridge Gate Driver AEC-Q100 Qualified SOIC

    MPQ18021HN-A 2.5A Half-Bridge Gate Driver AEC-Q100 Qualified SOIC

    MPS MPQ18021HN-A — Half-Bridge Gate Driver AEC-Q100 Qualified, 2.5 A output, SOIC, AEC-Q100.