EVL2460-J-00A 4.5-45V, 0.6A Step-Down Converter Evaluation Board TSOT23

Product

EVL2460-J-00A 4.5-45V, 0.6A Step-Down Converter Evaluation Board TSOT23

Share

pMPS EVL2460-J-00A — Step-Down Converter Evaluation Board, 4.5-45V input, 0.6 A output, TSOT23./p

[email protected]

MPS Step-Down TSOT23 Power Management Converter Evaluation Boards

Product Details
Download

EVL2460-J-00A 4.5-45V, 0.6A Step-Down Converter Evaluation Board TSOT23

The MPS EVL2460-J-00A is an evaluation board built around the MP2460 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 45 V input, is rated for 0.6 A and switches at 1.7 MHz. The board carries the device in its TSOT23 package.

The EVL2460-J-00A evaluation board is designed to demonstrate the capabilities of MPS's MP2460, a high-frequency, step-down switching regulator with integrated high-side and low-side power MOSFETs.

Key Specifications

Part Number	EVL2460-J-00A
Board For	MP2460
Board Type	Evaluation / demonstration board
Function	Step-Down Converter Evaluation Board
Input Voltage	4.5 V to 45 V
Current Rating	0.6 A
Switching Frequency	1.7 MHz
Peak Efficiency	90%
Package	TSOT23
Ordering Codes	EVL2460-J-00A

Features

Meets 0.1% Output Voltage Ripple
Low-Dropout Mode
Wide 4.5V to 45V Operating Input Range
50V Absolute Maximum Rating
2% to 98% Large Range Duty Cycle
Light-Load Mode
>90% Efficiency
Dedicated Internal Compensation
Stable with Ceramic/Electrolytic Output Capacitors
420mΩ/220mΩ Internal Power MOSFETs

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.