EVL3414E-J-00A 0.8-4V, 1.8A Synchronous Boost Converter Evaluation Board TSOT23
EVL3414E-J-00A 0.8-4V, 1.8A Synchronous Boost Converter Evaluation Board TSOT23

EVL3414E-J-00A 0.8-4V, 1.8A Synchronous Boost Converter Evaluation Board TSOT23

Share
pMPS EVL3414E-J-00A — Synchronous Boost Converter Evaluation Board, 0.8-4V input, 1.8 A output, TSOT23./p
    • Product Details
    • Download

    EVL3414E-J-00A 0.8-4V, 1.8A Synchronous Boost Converter Evaluation Board TSOT23

    The MPS EVL3414E-J-00A is an evaluation board built around the MP3414E for bench characterisation of the device in its intended topology. It operates from a 0.8 V to 4 V input, is rated for 1.8 A and switches at 1 MHz. The board carries the device in its TSOT23 package.

    The EVL3414E-J-00A is an evaluation board for the MP3414E — a high-efficiency, synchronous, current-mode, step-up converter with output to input disconnect.

    Key Specifications

    Part NumberEVL3414E-J-00A
    Board ForMP3414E
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Boost Converter Evaluation Board
    Input Voltage0.8 V to 4 V
    Current Rating1.8 A
    Switching Frequency1 MHz
    Peak Efficiency96%
    PackageTSOT23
    Ordering CodesEVL3414E-J-00A

    Features

    • Start-Up Input Range: 0.8V to 4V
    • Operation Input Range: 0.6V to 4V
    • Output Range: 1.8V to 4V
    • Up to 96% Efficiency
    • Current-Mode Control with Internal Compensation
    • Short-Circuit Protection (SCP)
    • True Output Disconnect from Input
    • VIN > VOUT Down Mode Operation
    • High Efficiency under Light-Load Conditions
    • Inrush Current Limiting and Internal Soft Start (SS)

    Evaluation Board

    EVL3414E-J-00A evaluation board
    EVL3414E-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVL3414E-J-00A support?
    0.8 V to 4 V. The rated output is 1.8 A.
    Which package and ordering codes apply to the EVL3414E-J-00A?
    TSOT23; order codes include EVL3414E-J-00A.
    What are the defining features of the EVL3414E-J-00A?
    Start-Up Input Range: 0.8V to 4V Operation Input Range: 0.6V to 4V

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products