EVL3437-J-00A 2.7-16V Fully-Integrated Synchronous Boost Converter EV Board Evaluation Board QFN-10

Product

EVL3437-J-00A 2.7-16V Fully-Integrated Synchronous Boost Converter EV Board Evaluation Board QFN-10

Share

pMPS EVL3437-J-00A — Fully-Integrated Synchronous Boost Converter EV Board, 2.7-16V input, QFN-10./p

[email protected]

MPS QFN-10 Boost Power Management Converter Evaluation Boards

Product Details
Download

EVL3437-J-00A 2.7-16V Fully-Integrated Synchronous Boost Converter EV Board Evaluation Board QFN-10

The MPS EVL3437-J-00A is an evaluation board built around the MP3437 for bench characterisation of the device in its intended topology. It operates from a 2.7 V to 16 V input and switches at 600 kHz. The board carries the device in its QFN-10 package.

The EVL3437-J-00A evaluation board is designed to demonstrate the capabilities of the MP3437.

Key Specifications

Part Number	EVL3437-J-00A
Board For	MP3437
Board Type	Evaluation / demonstration board
Function	Fully-Integrated Synchronous Boost Converter EV Board
Input Voltage	2.7 V to 16 V
Switching Frequency	600 kHz
Peak Efficiency	89%
Package	QFN-10
Ordering Codes	EVL3437-J-00A

Features

2.7V to 16V Start-Up Voltage (1)
0.8V to 16V Operation Voltage
Up to 16V Output Voltage
Supports 20W Peak Power Load from 3.3V
9.5A Internal Switch Current Limit
Integrated 14mΩ and 21mΩ Power MOSFETs
>89% Efficiency for 3.3V to 8V VIN/2.5A
Auto Pass-Through Function in PSM Mode
600kHz Fixed Switching Frequency
Adaptive COT for Fast Transient Response

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.