EVM3506A-QV-00A 4.5-36V 36V/600mA Mini- Module Regulater Evaluation Board QFN-19

Product

EVM3506A-QV-00A 4.5-36V 36V/600mA Mini- Module Regulater Evaluation Board QFN-19

Share

pMPS EVM3506A-QV-00A — 36V/600mA Mini- Module Regulater, 4.5-36V input, 600 mA output, QFN-19./p

[email protected]

MPS QFN-19 Power Management Module Evaluation Boards

Product Details
Download

EVM3506A-QV-00A 4.5-36V 36V/600mA Mini- Module Regulater Evaluation Board QFN-19

The MPS EVM3506A-QV-00A is an evaluation board built around the MPM3506A for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 36 V input, is rated for 600 mA and switches at 1.15 MHz. The board carries the device in its QFN-19 package.

The EVM3506A-QV-00A is an evaluation board for MPM3506A, a synchronous rectified, step- down Mini-Module regulator with built-in power MOSFETS, inductor and two capacitors.

Key Specifications

Part Number	EVM3506A-QV-00A
Board For	MPM3506A
Board Type	Evaluation / demonstration board
Function	36V/600mA Mini- Module Regulater
Input Voltage	4.5 V to 36 V
Current Rating	600 mA
Switching Frequency	1.15 MHz
Package	QFN-19
Ordering Codes	EVM3506A-QV-00A

Features

Complete Switch Mode Power Supply
4.5V-to-36V Wide Operating Input Range
600mA Continuous Load Current
Low RDS(ON) Internal Power MOSFETs
Fixed 1.15MHz Switching Frequency
800kHz-2MHz Frequency Sync
Power Save Mode for Light Load
Power Good Indicator
OCP Protection with Valley Current detection and Hiccup
Thermal Shutdown

Applications

Telecom Applications

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.