EVM3509-QV-00A 4-36V 36V/0.9A Mini- Module Regulater Evaluation Board QFN-17

Product

EVM3509-QV-00A 4-36V 36V/0.9A Mini- Module Regulater Evaluation Board QFN-17

Share

pMPS EVM3509-QV-00A — 36V/0.9A Mini- Module Regulater, 4-36V input, 0.9 A output, QFN-17./p

[email protected]

MPS QFN-17 Power Management Module Evaluation Boards

Product Details
Download

EVM3509-QV-00A 4-36V 36V/0.9A Mini- Module Regulater Evaluation Board QFN-17

The MPS EVM3509-QV-00A is an evaluation board built around the MPM3515 for bench characterisation of the device in its intended topology. It operates from a 4 V to 36 V input, is rated for 0.9 A and switches at 2.2 MHz. The board carries the device in its QFN-17 package.

The EVM3509-QV-00A is an evaluation board for MPM3515, a synchronous rectified, step- down Mini-Module regulator with built-in power MOSFETS, inductor and two capacitors.

Key Specifications

Part Number	EVM3509-QV-00A
Board For	MPM3515
Board Type	Evaluation / demonstration board
Function	36V/0.9A Mini- Module Regulater
Input Voltage	4 V to 36 V
Current Rating	0.9 A
Switching Frequency	2.2 MHz
Package	QFN-17
Ordering Codes	EVM3509-QV-00A

Features

Complete Switch Mode Power Supply
4V-to-36V Wide Operating Input Range
0.9A Continuous Load Current
Low RDS(ON) Internal Power MOSFETs
Fixed 2.2MHz Switching Frequency
450kHz-2.2MHz Frequency Sync
Forced CCM mode
Power Good Indicator
OCP Protection with Valley Current Detection and Hiccup
Thermal Shutdown

Evaluation Board

Applications

Telecom Applications

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.