EVM3510A-QV-00A 4.5-36V 36V/1.2A Mini- Module Regulater Evaluation Board QFN-19

Product

EVM3510A-QV-00A 4.5-36V 36V/1.2A Mini- Module Regulater Evaluation Board QFN-19

Share

pMPS EVM3510A-QV-00A — 36V/1.2A Mini- Module Regulater, 4.5-36V input, 1.2 A output, QFN-19./p

[email protected]

MPS QFN-19 Power Management Module Evaluation Boards

Product Details
Download

EVM3510A-QV-00A 4.5-36V 36V/1.2A Mini- Module Regulater Evaluation Board QFN-19

The MPS EVM3510A-QV-00A is an evaluation board built around the MPM3510A for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 36 V input, is rated for 1.2 A and switches at 1.15 MHz. The board carries the device in its QFN-19 package.

The EVM3510A-QV-00A is an evaluation board for MPM3510A, a synchronous rectified, step- down Mini-Module regulator with built-in power MOSFETS, inductor and two capacitors.

Key Specifications

Part Number	EVM3510A-QV-00A
Board For	MPM3510A
Board Type	Evaluation / demonstration board
Function	36V/1.2A Mini- Module Regulater
Input Voltage	4.5 V to 36 V
Current Rating	1.2 A
Switching Frequency	1.15 MHz
Package	QFN-19
Ordering Codes	EVM3510A-QV-00A

Features

Complete Switch Mode Power Supply
4.5V-to-36V Wide Operating Input Range
1.2A Continuous Load Current
Low RDS(ON) Internal Power MOSFETs
Fixed 1.15MHz Switching Frequency
800kHz-2MHz Frequency Sync
Power Save Mode for Light Load
Power Good Indicator
OCP Protection with Valley Current detection and Hiccup
Thermal Shutdown

Applications

Telecom Applications

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.