EVM3650-QW-00A 2.75-17V, 6A Step-Down Converter Module Evaluation Board QFN-24
EVM3650-QW-00A 2.75-17V, 6A Step-Down Converter Module Evaluation Board QFN-24

EVM3650-QW-00A 2.75-17V, 6A Step-Down Converter Module Evaluation Board QFN-24

Share
pMPS EVM3650-QW-00A — Step-Down Converter Module Evaluation Board, 2.75-17V input, 6 A output, QFN-24./p
    • Product Details
    • Download

    EVM3650-QW-00A 2.75-17V, 6A Step-Down Converter Module Evaluation Board QFN-24

    The MPS EVM3650-QW-00A is an evaluation board built around the MPM3650 for bench characterisation of the device in its intended topology. It operates from a 2.75 V to 17 V input, is rated for 6 A and switches at 1200 kHz. The board carries the device in its QFN-24 package.

    The EVM3650-QW-00A is an evaluation board designed to demonstrate the capabilities of the MPM3650, a fully integrated, high-frequency, synchronous, rectified, step-down power module with an internal inductor.

    Key Specifications

    Part NumberEVM3650-QW-00A
    Board ForMPM3650
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Converter Module Evaluation Board
    Input Voltage2.75 V to 17 V
    Current Rating6 A
    Switching Frequency1200 kHz
    PackageQFN-24
    Ordering CodesEVM3650-QW-00A

    Features

    • Wide 2.75V to 17V Operating Input Range
    • Continuous Output Current: o Up to 6A Output Current for Inputs Between 0.6V and 1.8V o Up to 5A Output Current for Inputs Above 1.8V
    • Discontinuous Conduction Mode (DCM) for High Efficiency during Light Load Operation
    • Adjustable Output from 0.6V
    • Supports Pre-Biased Start-Up
    • 1200kHz Fixed Switching Frequency (fSW)
    • Configurable External Soft Start (SS)
    • Enable (EN) and Power Good (PG) Pins for Power Sequencing
    • Over-Current Protection (OCP) with Hiccup Mode
    • Thermal Shutdown

    Evaluation Board

    EVM3650-QW-00A evaluation board
    EVM3650-QW-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVM3650-QW-00A support?
    2.75 V to 17 V. The rated output is 6 A.
    Which package and ordering codes apply to the EVM3650-QW-00A?
    QFN-24; order codes include EVM3650-QW-00A.
    What are the defining features of the EVM3650-QW-00A?
    Wide 2.75V to 17V Operating Input Range Continuous Output Current: o Up to 6A Output Current for Inputs Between 0.6V and 1.8V o Up to 5A Output Current for Inputs Above 1.8V

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products