EVM3805A-QB-00A 2.5-6V, 0.6A Peak Synchronous Step-Down Switcher Evaluation Board QFN3

Product

EVM3805A-QB-00A 2.5-6V, 0.6A Peak Synchronous Step-Down Switcher Evaluation Board QFN3

Share

pMPS EVM3805A-QB-00A — Peak Synchronous Step-Down Switcher Evaluation Board, 2.5-6V input, 0.6 A output, QFN3./p

[email protected]

MPS Step-Down QFN3 Power Management Evaluation Boards

Product Details
Download

EVM3805A-QB-00A 2.5-6V, 0.6A Peak Synchronous Step-Down Switcher Evaluation Board QFN3

The MPS EVM3805A-QB-00A is an evaluation board built around the MPM3805A for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 6 V input and is rated for 0.6 A. The board carries the device in its QFN3 package.

The EVM3805A-QB-00A is used for demonstrating the performance of MPS's MPM3805A a low voltage high switching frequency step-down switcher with built-in power MOSFETs and power inductor.

Key Specifications

Part Number	EVM3805A-QB-00A
Board For	MPM3805A
Board Type	Evaluation / demonstration board
Function	Peak Synchronous Step-Down Switcher Evaluation Board
Input Voltage	2.5 V to 6 V
Current Rating	0.6 A
Package	QFN3
Ordering Codes	EVM3805A-QB-00A

Features

Wide 2.5V to 6V Operating Input Range
Adjustable output from 0.6V
3mm x 2.5mm x 0.9mm QFN Package
Total Solution Size 6mm x 3.8mm
Up to 0.6A Peak Output Current
100% Duty Cycle in Dropout
Force CCM Mode
EN and Power Good for Power Sequencing
Cycle-by-Cycle Over-Current Protection
Short Circuit Protection with Hiccup Mode

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.