EVM3811-G-00A 2.3-5.5V, 1A Synchronous Step-down Switcher Evaluation Board QFN10
EVM3811-G-00A 2.3-5.5V, 1A Synchronous Step-down Switcher Evaluation Board QFN10

EVM3811-G-00A 2.3-5.5V, 1A Synchronous Step-down Switcher Evaluation Board QFN10

Share
pMPS EVM3811-G-00A — Synchronous Step-down Switcher, 2.3-5.5V input, 1 A output, QFN10./p
    • Product Details
    • Download

    EVM3811-G-00A 2.3-5.5V, 1A Synchronous Step-down Switcher Evaluation Board QFN10

    The MPS EVM3811-G-00A is an evaluation board built around the MPM3811 for bench characterisation of the device in its intended topology. It operates from a 2.3 V to 5.5 V input, is rated for 1 A and switches at 2.2 MHz. The board carries the device in its QFN10 package.

    The MPM3811 is a monolithic step-down switch mode converter with built-in power MOSFETs and inductor.

    Key Specifications

    Part NumberEVM3811-G-00A
    Board ForMPM3811
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-down Switcher
    Input Voltage2.3 V to 5.5 V
    Current Rating1 A
    Switching Frequency2.2 MHz
    Peak Efficiency91%
    PackageQFN10
    Ordering CodesEVM3811-G-00A

    Features

    • Up to 91% Peak Efficiency
    • Wide 2.3V to 5.5V Operating Input Range
    • Output Voltage as Low as 0.6V
    • 100% Duty Cycle in Dropout
    • 1A Output Current
    • 120mΩ and 80mΩ Internal Power MOSFET.
    • 2.2MHz Frequency
    • EN for Power Sequencing
    • Cycle-by-Cycle Over Current Protection
    • 0.5ms Internal Soft-Start Time

    Evaluation Board

    EVM3811-G-00A evaluation board
    EVM3811-G-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVM3811-G-00A support?
    2.3 V to 5.5 V. The rated output is 1 A.
    Which package and ordering codes apply to the EVM3811-G-00A?
    QFN10; order codes include EVM3811-G-00A.
    What are the defining features of the EVM3811-G-00A?
    Up to 91% Peak Efficiency Wide 2.3V to 5.5V Operating Input Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products