EVM3830-QV-00A 2.7-6V, 3A Module Synchronous Step-Down Converter Evaluation Board

Product

EVM3830-QV-00A 2.7-6V, 3A Module Synchronous Step-Down Converter Evaluation Board

Share

pMPS EVM3830-QV-00A — Module Synchronous Step-Down Converter, 2.7-6V input, 3 A output./p

[email protected]

MPS Step-Down Power Management Converter Module Evaluation Boards

Product Details
Download

EVM3830-QV-00A 2.7-6V, 3A Module Synchronous Step-Down Converter Evaluation Board

The MPS EVM3830-QV-00A is an evaluation board built around the MPM3830 for bench characterisation of the device in its intended topology. It operates from a 2.7 V to 6 V input, is rated for 3 A and switches at 1.2 MHz.

The EVM3830-QV-00A is used for demonstrating the performance of MPS's MPM3830 a low voltage high switching frequency step-down switcher with built-in power MOSFETs and power inductor.

Key Specifications

Part Number	EVM3830-QV-00A
Board For	MPM3830
Board Type	Evaluation / demonstration board
Function	Module Synchronous Step-Down Converter
Input Voltage	2.7 V to 6 V
Current Rating	3 A
Switching Frequency	1.2 MHz
Ordering Codes	EVM3830-QV-00A

Features

Wide 2.7V to 6V Operating Input Range
Fixed and Adjustable output from 0.6V
3.0mm x 5.0mm x 1.6mm QFN Package
Total Solution Size 8.5mm x 4.5 mm
Up to 3A Continuous Output Current
100% Duty Cycle in Dropout
Ultra Low IQ: 40μA
EN and Power Good for Power Sequencing
Cycle-by-Cycle Over-Current Protection
Short Circuit Protection with Hiccup Mode

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.