EVM3840-QV-00A 2.8-5.5V, 4A Synchronous Step-Down Converter Evaluation Board QFN-20
EVM3840-QV-00A 2.8-5.5V, 4A Synchronous Step-Down Converter Evaluation Board QFN-20

EVM3840-QV-00A 2.8-5.5V, 4A Synchronous Step-Down Converter Evaluation Board QFN-20

Share
pMPS EVM3840-QV-00A — Synchronous Step-Down Converter, 2.8-5.5V input, 4 A output, QFN-20./p
    • Product Details
    • Download

    EVM3840-QV-00A 2.8-5.5V, 4A Synchronous Step-Down Converter Evaluation Board QFN-20

    The MPS EVM3840-QV-00A is an evaluation board built around the MPM3840 for bench characterisation of the device in its intended topology. It operates from a 2.8 V to 5.5 V input, is rated for 4 A and switches at 1.2 MHz. The board carries the device in its QFN-20 package.

    The MPM3840 is a monolithic step-down converter with built-in internal power MOSFETs and inductor.

    Key Specifications

    Part NumberEVM3840-QV-00A
    Board ForMPM3840
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down Converter
    Input Voltage2.8 V to 5.5 V
    Current Rating4 A
    Switching Frequency1.2 MHz
    PackageQFN-20
    Ordering CodesEVM3840-QV-00A

    Features

    • Above 80% Light Load Efficiency
    • Low IQ: 40μA
    • Wide 2.8V to 5.5V Operating Input Range
    • Output Voltage as Low as 0.6V
    • 100% Duty Cycle in Dropout
    • 4A Output Current
    • 25mΩ and 12mΩ Internal Power MOSFET
    • 1.2MHz Frequency
    • EN and Power Good for Power Sequencing
    • Available in a QFN-20 (3mmx5mmx1.6mm)

    Evaluation Board

    EVM3840-QV-00A evaluation board
    EVM3840-QV-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVM3840-QV-00A support?
    2.8 V to 5.5 V. The rated output is 4 A.
    Which package and ordering codes apply to the EVM3840-QV-00A?
    QFN-20; order codes include EVM3840-QV-00A.
    What are the defining features of the EVM3840-QV-00A?
    Above 80% Light Load Efficiency Low IQ: 40μA

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products