EVQ1531-M-00A 2.7-5.5V Triple Output Step-Up Plus Charge Pump Evaluation Board TSSOP16

Product

EVQ1531-M-00A 2.7-5.5V Triple Output Step-Up Plus Charge Pump Evaluation Board TSSOP16

Share

pMPS EVQ1531-M-00A — Triple Output Step-Up Plus Charge Pump, 2.7-5.5V input, TSSOP16./p

[email protected]

MPS TSSOP16 Power Management Evaluation Boards Step-Up

Product Details
Download

EVQ1531-M-00A 2.7-5.5V Triple Output Step-Up Plus Charge Pump Evaluation Board TSSOP16

The MPS EVQ1531-M-00A is an evaluation board built around the MP1531 for bench characterisation of the device in its intended topology. It operates from a 2.7 V to 5.5 V input and switches at 250 KHz. The board carries the device in its TSSOP16 package.

The EVQ1531-M-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP1531 triple output step-up converter with charge-pumps.

Key Specifications

Part Number	EVQ1531-M-00A
Board For	MP1531
Board Type	Evaluation / demonstration board
Function	Triple Output Step-Up Plus Charge Pump
Input Voltage	2.7 V to 5.5 V
Switching Frequency	250 KHz
Peak Efficiency	95%
Package	TSSOP16
Ordering Codes	EVQ1531-M-00A

Features

2.7V to 5.5V Operating Input Range
500mA Switch Current Limit
3 Outputs in Single Package
Step-Up Converter up to 22V
Positive 10mA Linear Regulator
Negative 10mA Linear Regulator
250mΩ Internal Power MOSFET Switch
Up to 95% Efficiency
1μA Shutdown Mode
Fixed 250KHz Frequency

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.