Welcome to our company!
EVQ3367A-R-00A 3.5-36V Maximum 150mA/Ch Boost WLED Driver Evaluation Board QFN-24
Share
pMPS EVQ3367A-R-00A — Maximum 150mA/Ch Boost WLED Driver, 3.5-36V input, 150 mA output, 6 channels, QFN-24, AEC-Q100./p
- Product Details
- Download
EVQ3367A-R-00A 3.5-36V Maximum 150mA/Ch Boost WLED Driver Evaluation Board QFN-24
The MPS EVQ3367A-R-00A is an evaluation board built around the MPQ3367A for bench characterisation of the device in its intended topology. It operates from a 3.5 V to 36 V input and is rated for 150 mA. The board carries the device in its QFN-24 package.
The EVQ3367A-R-00A is an evaluation board designed to demonstrate the capabilities of the MPQ3367A, a step-up converter with six channel current sources.
Key Specifications
| Part Number | EVQ3367A-R-00A |
| Board For | MPQ3367A |
| Board Type | Evaluation / demonstration board |
| Function | Maximum 150mA/Ch Boost WLED Driver |
| Input Voltage | 3.5 V to 36 V |
| Current Rating | 150 mA |
| Channels | 6 |
| Interface | I²C |
| Package | QFN-24 |
| Qualification | AEC-Q100 |
| Ordering Codes | EVQ3367A-R-00A |
Features
- 3.5V to 36V Operating Input Voltage
- 6 Channels with Maximum 150mA per Channel
- Internal 100mΩ, 50V MOSFET
- Up to 2.2MHz Configurable Switching Frequency (fSW)
- External Sync SW Function
- Multi-Dimming Operation Mode through Pulse-Width Modulation (PWM) Input: o Direct PWM Dimming o Analog Dimming o Mix Dimming with 25% or 12.5% Transfer Point
- 15000:1 Dimming Ratio during PWM Dimming when fPWM ≤ 200Hz
- 200:1 Dimming Ratio during Analog Dimming through PWM Dimming Signal Input
- Excellent EMI Performance
- Frequency Spread Spectrum
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What input voltage does the EVQ3367A-R-00A support?
3.5 V to 36 V. The rated output is 150 mA.
Which package and ordering codes apply to the EVQ3367A-R-00A?
QFN-24; order codes include EVQ3367A-R-00A.
What are the defining features of the EVQ3367A-R-00A?
3.5V to 36V Operating Input Voltage 6 Channels with Maximum 150mA per Channel
Is the EVQ3367A-R-00A qualified for automotive designs?
Yes — it is AEC-Q100 qualified. Confirm the grade against the qualification summary in the datasheet before specifying it on a safety-related rail.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
