EVQ4430-L-00A 5-36V, 3.5A Synchronous Step-Down Converter Evaluation Board QFN-16
EVQ4430-L-00A 5-36V, 3.5A Synchronous Step-Down Converter Evaluation Board QFN-16

EVQ4430-L-00A 5-36V, 3.5A Synchronous Step-Down Converter Evaluation Board QFN-16

Share
pMPS EVQ4430-L-00A — Synchronous Step-Down Converter Evaluation Board, 5-36V input, 3.5 A output, QFN-16./p
    • Product Details
    • Download

    EVQ4430-L-00A 5-36V, 3.5A Synchronous Step-Down Converter Evaluation Board QFN-16

    The MPS EVQ4430-L-00A is an evaluation board built around the MP4430 for bench characterisation of the device in its intended topology. It operates from a 5 V to 36 V input and is rated for 3.5 A. The board carries the device in its QFN-16 package.

    The EVQ4430-L-00A evaluation board is designed to demonstrate the capabilities of the MP4430 and the MPQ4430.

    Key Specifications

    Part NumberEVQ4430-L-00A
    Board ForMP4430
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down Converter Evaluation Board
    Input Voltage5 V to 36 V
    Current Rating3.5 A
    PackageQFN-16
    Ordering CodesEVQ4430-L-00A

    Features

    • Wide 5V to 36V Operating Input Voltage Range
    • 3.5A of Continuous Output Current
    • 1μA Low Shutdown Mode Current
    • 10μA Sleep Mode Quiescent Current
    • Internal 90mΩ High-Side and 40mΩ Low- Side MOSFETs
    • 350kHz to 2.5MHz Configurable Switching Frequency
    • Synchronize to External Clock, Selectable In-Phase or 180° Out-of-Phase
    • Power Good Indicator
    • Configurable Soft-Start Time
    • 80ns Minimum On Time

    Evaluation Board

    EVQ4430-L-00A evaluation board
    EVQ4430-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVQ4430-L-00A support?
    5 V to 36 V. The rated output is 3.5 A.
    Which package and ordering codes apply to the EVQ4430-L-00A?
    QFN-16; order codes include EVQ4430-L-00A.
    What are the defining features of the EVQ4430-L-00A?
    Wide 5V to 36V Operating Input Voltage Range 3.5A of Continuous Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products