EVQ4480-V-00A 4.2-36V, 6A Step-Down Converter Evaluation Board QFN25
EVQ4480-V-00A 4.2-36V, 6A Step-Down Converter Evaluation Board QFN25

EVQ4480-V-00A 4.2-36V, 6A Step-Down Converter Evaluation Board QFN25

Share
pMPS EVQ4480-V-00A — Step-Down Converter, 4.2-36V input, 6 A output, QFN25, AEC-Q100./p
    • Product Details
    • Download

    EVQ4480-V-00A 4.2-36V, 6A Step-Down Converter Evaluation Board QFN25

    The MPS EVQ4480-V-00A is an evaluation board built around the MPQ4480 for bench characterisation of the device in its intended topology. It operates from a 4.2 V to 36 V input, is rated for 6 A and switches at 2.1 MHz. The board carries the device in its QFN25 package.

    The EVQ4480-V-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MPQ4480, which is a high-frequency, synchronous rectified, step-down, switch-mode converter.

    Key Specifications

    Part NumberEVQ4480-V-00A
    Board ForMPQ4480
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Converter
    Input Voltage4.2 V to 36 V
    Current Rating6 A
    Switching Frequency2.1 MHz
    InterfacePWM
    PackageQFN25
    QualificationAEC-Q100
    Ordering CodesEVQ4480-V-00A

    Features

    • 4.2V to 36V Operating Input-Voltage Range
    • 6A Output Current
    • Internal Auto EN Pull-up
    • 20mΩ/15mΩ Low RDS(ON) Internal Buck Power MOSFETs
    • Integrated 4mΩ Ground Sensing Resistor
    • Frequency Adjustable (235kHz to 2.2MHz)
    • CC Output-Current Limit, 3 level adjustable, 2.75A/3.75A/7.5A
    • Forced PWM Mode
    • Support 300kHz to 2.1MHz Frequency SYNC Input
    • EN Shutdown Discharge

    Evaluation Board

    EVQ4480-V-00A evaluation board
    EVQ4480-V-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVQ4480-V-00A support?
    4.2 V to 36 V. The rated output is 6 A.
    Which package and ordering codes apply to the EVQ4480-V-00A?
    QFN25; order codes include EVQ4480-V-00A.
    What are the defining features of the EVQ4480-V-00A?
    4.2V to 36V Operating Input-Voltage Range 6A Output Current
    Is the EVQ4480-V-00A qualified for automotive designs?
    Yes — it is AEC-Q100 qualified. Confirm the grade against the qualification summary in the datasheet before specifying it on a safety-related rail.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products