EVQ4571-QB-00A 5-60V, 1A Synchronous Buck Converter Evaluation Board QFN-12
EVQ4571-QB-00A 5-60V, 1A Synchronous Buck Converter Evaluation Board QFN-12

EVQ4571-QB-00A 5-60V, 1A Synchronous Buck Converter Evaluation Board QFN-12

Share
pMPS EVQ4571-QB-00A — Synchronous Buck Converter Evaluation Board, 5-60V input, 1 A output, QFN-12./p
    • Product Details
    • Download

    EVQ4571-QB-00A 5-60V, 1A Synchronous Buck Converter Evaluation Board QFN-12

    The MPS EVQ4571-QB-00A is an evaluation board built around the MPQ4571 for bench characterisation of the device in its intended topology. It operates from a 5 V to 60 V input and is rated for 1 A. The board carries the device in its QFN-12 package.

    The EVQ4571-QB-00A evaluation board is designed to demonstrate the capabilities of MPS's MPQ4571/MPQ4571-AEC1.

    Key Specifications

    Part NumberEVQ4571-QB-00A
    Board ForMPQ4571
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Buck Converter Evaluation Board
    Input Voltage5 V to 60 V
    Current Rating1 A
    Quiescent Current40 µA
    PackageQFN-12
    Ordering CodesEVQ4571-QB-00A

    Features

    • Wide 5V to 60V Operating Input Range with 1A Continuous Output Current
    • High-Efficiency Synchronous Mode Control
    • 250mΩ/45mΩ Internal Power MOSFETs
    • Configurable Frequency Up to 2.2MHz
    • 180° Out-of-Phase SYNCO Clock
    • 40μA Quiescent Current
    • Low Shutdown Mode Current: 2μA
    • Selectable AAM or Forced CCM Operation at Light-Load
    • Internal 0.45ms Soft Start
    • Remote EN Control

    Evaluation Board

    EVQ4571-QB-00A evaluation board
    EVQ4571-QB-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EVQ4571-QB-00A support?
    5 V to 60 V. The rated output is 1 A.
    Which package and ordering codes apply to the EVQ4571-QB-00A?
    QFN-12; order codes include EVQ4571-QB-00A.
    What are the defining features of the EVQ4571-QB-00A?
    Wide 5V to 60V Operating Input Range with 1A Continuous Output Current High-Efficiency Synchronous Mode Control

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products