EVQ6524-R-00A 7-28V, 0.9A Quad Half-Bridge Motor Driver Evaluation Board QFN4

Product

EVQ6524-R-00A 7-28V, 0.9A Quad Half-Bridge Motor Driver Evaluation Board QFN4

Share

pMPS EVQ6524-R-00A — Quad Half-Bridge Motor Driver Evaluation Board, 7-28V input, 0.9 A output, QFN4, AEC-Q100./p

[email protected]

Automotive AEC-Q100 MPS Power Management Motor Evaluation Boards QFN4

Product Details
Download

EVQ6524-R-00A 7-28V, 0.9A Quad Half-Bridge Motor Driver Evaluation Board QFN4

The MPS EVQ6524-R-00A is an evaluation board built around the MPQ6524 for bench characterisation of the device in its intended topology. It operates from a 7 V to 28 V input and is rated for 0.9 A. The board carries the device in its QFN4 package.

The EVQ6524-R-00A is an evaluation board for the MPQ6524, a four half-bridge DMOS output driver with integrated power MOSFETs.

Key Specifications

Part Number	EVQ6524-R-00A
Board For	MPQ6524
Board Type	Evaluation / demonstration board
Function	Quad Half-Bridge Motor Driver Evaluation Board
Input Voltage	7 V to 28 V
Current Rating	0.9 A
Package	QFN4
Qualification	AEC-Q100
Ordering Codes	EVQ6524-R-00A

Features

Wide 7V to 28V Operating Input Range
Up to 0.9A Output Current for Each Channel
Total Max Current 2.4A (all outputs combined)
Rdson (HS + LS) Typically 1.1Ω at 25°C, Maximum 2Ω at 150°C
Very Low Quiescent Current IVS < 6μA in Standby Mode Versus Total Temperature Range
Serial Data Interface
Short-Circuit Protection
Under-Voltage Protection
Available in AEC-Q100 Grade 1

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.