Welcome to our company!
EVQ7200-L-00B 6-20V, 1.2A Synchronous LED Driver Buck-Boost Mode Evaluation Board QFN-19
Share
pMPS EVQ7200-L-00B — Synchronous LED Driver Buck-Boost Mode Evaluation Board, 6-20V input, 1.2 A output, QFN-19, AEC-Q100./p
- Product Details
- Download
EVQ7200-L-00B 6-20V, 1.2A Synchronous LED Driver Buck-Boost Mode Evaluation Board QFN-19
The MPS EVQ7200-L-00B is an evaluation board built around the MPQ7200-AEC1 for bench characterisation of the device in its intended topology. It operates from a 6 V to 20 V input, is rated for 1.2 A and switches at 1.15 MHz. The board carries the device in its QFN-19 package.
The EVQ7200-L-00B evaluation board is designed to demonstrate the capabilities of the MPQ7200-AEC1.
Key Specifications
| Part Number | EVQ7200-L-00B |
| Board For | MPQ7200-AEC1 |
| Board Type | Evaluation / demonstration board |
| Function | Synchronous LED Driver Buck-Boost Mode Evaluation Board |
| Input Voltage | 6 V to 20 V |
| Current Rating | 1.2 A |
| Switching Frequency | 1.15 MHz |
| Interface | PWM |
| Package | QFN-19 |
| Qualification | AEC-Q100 |
| Ordering Codes | EVQ7200-L-00B |
Features
- Wide 6V to 42V Operating Input Range
- Buck-Boost Mode: Configurable 1.2A Max Continuous Output Current
- 44mΩ/40mΩ Internal Power MOSFETs
- Default 1.15MHz Switching Frequency for Buck-Boost Mode with Spread Spectrum
- PWM Dimming (100Hz to 2kHz Dimming Frequency)
- Internal 500Hz Two-Step Dimming with Programmable Duty Cycle
- Fault Indication for LED Short (to GND & Battery), Open, Output Over-voltage and Thermal Shutdown
- Over-Current Protection (OCP)
- Programmable Thermal Derating via NTC Remote Temperature Sensing
- EMI Reduction
Evaluation Board
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What input voltage does the EVQ7200-L-00B support?
6 V to 20 V. The rated output is 1.2 A.
Which package and ordering codes apply to the EVQ7200-L-00B?
QFN-19; order codes include EVQ7200-L-00B.
What are the defining features of the EVQ7200-L-00B?
Wide 6V to 42V Operating Input Range Buck-Boost Mode: Configurable 1.2A Max Continuous Output Current
Is the EVQ7200-L-00B qualified for automotive designs?
Yes — it is AEC-Q100 qualified. Confirm the grade against the qualification summary in the datasheet before specifying it on a safety-related rail.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
