FM320X FMSH Low-Power MCU
FM320X FMSH Low-Power MCU

FM320X FMSH Low-Power MCU

Share
pFM320X FMSH Low-Power MCU — 4.5V~5.5V, -40℃~85℃./p
    • Product Details
    • Download
    At a Glance
    • 4.5V~5.5V operating voltage
    • -40℃~85℃ operating temperature
    • ¾ Operating voltage range::4.5~5.5V
    • ¾ Operating Current :15mA

    The FMSH FM320X is a low-power mcu that runs from 4.5V~5.5V over -40℃~85℃.

    Key Specifications

    Operating Voltage4.5V~5.5V
    Operating Temperature-40℃~85℃
    UART Channels12

    Features

    • ¾ Operating voltage range::4.5~5.5V
    • ¾ Operating Current :15mA
    • ¾ Temperature range:‐40℃~+85℃ Ø Static power:0.2W,dynamic power increase 0.3W ¾ UART communicatio rate bps Adaptive SSOP24/QFN48 Package On‐chip source ¾ 32bit RISC MCU Core ¾ 320Kbytes FLASH ROM ¾ 16Kbytes RAM
    • ¾ Three independent hardware UARTs, supports infrared modulation output ¾ One I2C interface ¾ One SPI interface
    • ¾ Six input capture functio
    • ¾ Six output compare functio
    • ¾ One 12‐bits ADC with max 3.2Msps
    • ¾ One 12‐bits DAC with max 3.2Msps

    Design Notes

    • Low-power MCUs spend most of their life in sleep. Compare the datasheet current figures in the modes you actually use — active, sleep, and RTC-only — rather than the headline number.
    • Flash and RAM figures are the on-chip totals. The LCD segment buffer and any bootloader consume part of the RAM, so confirm the usable remainder against your firmware.
    • ISO 7816 channels are driven from the same pin group as the UARTs on some parts. Check the pin-out table before assuming all channels are simultaneously available.
    • Operating voltage range matters at both ends: the low end sets the battery cut-off, the high end decides whether the part survives a programming supply or a failing cell stack.

    Common Questions

    How much program memory is available?

    the on-chip Flash of on-chip Flash, with the on-chip RAM of the on-chip RAM. Part of the the on-chip RAM is reserved for the LCD buffer and the bootloader, so confirm the remainder against the firmware image.

    What is the operating voltage range?

    4.5V~5.5V. The low end sets the battery cut-off point; the high end covers programming and transient conditions.

    How many serial channels does it have?

    12. Check the pin-out table for channels that share pins with the ISO 7816 interface before allocating them in firmware.

    What is the operating temperature range?

    -40℃~85℃, which covers outdoor meter enclosures without additional heating.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message