FM3318 FMSH Low-Power MCU
FM3318 FMSH Low-Power MCU

FM3318 FMSH Low-Power MCU

Share
pFM3318 FMSH Low-Power MCU — 2.0V~5.5V, -40℃~85℃./p
    • Product Details
    • Download
    At a Glance
    • 2.0V~5.5V operating voltage
    • -40℃~85℃ operating temperature
    •  Operating voltage range: 2.0V ~ 5.5V
    •  Operating temperature range: ‐40 ℃ ~~ 85 ℃

    The FMSH FM3318 is a low-power mcu that runs from 2.0V~5.5V over -40℃~85℃.

    Key Specifications

    Operating Voltage2.0V~5.5V
    Operating Temperature-40℃~85℃
    UART Channels4
    ISO 7816 Channels1

    Features

    •  Operating voltage range: 2.0V ~ 5.5V
    •  Operating temperature range: ‐40 ℃ ~~ 85 ℃
    •  Built‐in 16bit Flip80251 MCU core
    •  Built‐in LCD / LED driver circuit, Upper to 4 COM 、6COM、8COM
    •  128Kbytes FLASH ROM,4Kbytes xRAM
    •  Built‐in low‐power consumption real‐time clock (RTC) with temperature compensatio
    •  Built‐in 4‐way independent hardware UARTs, supports the function of infrared modulation output and receive signal capture (the baud rate adaptive can be realized )
    •  Built‐in 2‐way independent hardware 7816 protocol interface That can connect to the

    Design Notes

    • Low-power MCUs spend most of their life in sleep. Compare the datasheet current figures in the modes you actually use — active, sleep, and RTC-only — rather than the headline number.
    • Flash and RAM figures are the on-chip totals. The LCD segment buffer and any bootloader consume part of the RAM, so confirm the usable remainder against your firmware.
    • ISO 7816 channels are driven from the same pin group as the UARTs on some parts. Check the pin-out table before assuming all channels are simultaneously available.
    • Operating voltage range matters at both ends: the low end sets the battery cut-off, the high end decides whether the part survives a programming supply or a failing cell stack.

    Common Questions

    How much program memory is available?

    the on-chip Flash of on-chip Flash, with the on-chip RAM of the on-chip RAM. Part of the the on-chip RAM is reserved for the LCD buffer and the bootloader, so confirm the remainder against the firmware image.

    What is the operating voltage range?

    2.0V~5.5V. The low end sets the battery cut-off point; the high end covers programming and transient conditions.

    How many serial channels does it have?

    4. Check the pin-out table for channels that share pins with the ISO 7816 interface before allocating them in firmware.

    What is the operating temperature range?

    -40℃~85℃, which covers outdoor meter enclosures without additional heating.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message