FMP100T8 FMSH FM7 FPGA 107K Logic Cells FCBGA676
FMP100T8 FMSH FM7 FPGA 107K Logic Cells FCBGA676

FMP100T8 FMSH FM7 FPGA 107K Logic Cells FCBGA676

Share
FMP100T8 FMSH FM7 FPGA 107K Logic Cells FCBGA676 — Programmable Logic Cells 106,560, Transceiver Channels 8
    • Product Details
    • Download
    At a Glance
    • 107K logic cells
    • 8 transceiver channels, up to 12.5 Gbps
    • 6.15 Mb BRAM and 320 DSP slices
    • FCBGA676 (27×27 mm) package

    The FMSH FMP100T8 is a 107K logic cell FPGA in the FM7 family, built on a 28 nm process in an FCBGA676 package measuring 27×27 mm. It carries 320 DSP slices, 6.15 Mb of BRAM and 8 transceiver channels running to 12.5 Gbps.

    Key Specifications

    Programmable Logic

    Programmable Logic Cells106,560
    BRAM Blocks175
    BRAM Capacity6.15 Mb
    DSP Slices320

    Hard IP Blocks

    PCIe 2.0Supported
    Transceiver Channels8
    Transceiver Line Rate12.5 Gbps
    DDR3 Data Rate1,066 Mbps

    Performance

    Core Voltage1.0 V
    Typical Operating Frequency250 MHz
    Operating Temperature-40 to 105 °C

    Package and I/O

    PackageFCBGA676
    Package Size27 × 27 mm
    Ball Pitch1.0 mm
    HPIO / HRIO / HS Transceiver Channels0/300/8

    Family Overview

    The FM7 family is built on a 28 nm process and targets designs that need long-term supply stability and predictable cost. The fabric carries LUT-based programmable logic, multi-voltage I/O, transceivers up to 13.1 Gbps and hardened DDR3 controllers, and is supported by FMSH's own Procise EDA toolchain.

    • 28 nm process
    • SerDes up to 13.1 Gbps
    • Million-gate class
    • Procise EDA toolchain

    Applications

    Industrial Ethernet, machine vision, motor control, instrumentation and legacy design migration where long-term supply matters more than peak density.

    Design Notes

    • Logic utilisation above roughly 80% starts to cost timing closure. If the design is close to the cell count of the chosen part, take the next density up rather than pushing the fitter.
    • Transceiver count is fixed per part. Count the lanes your protocol needs — PCIe, Ethernet, Interlaken and Aurora all consume them differently — before picking a T-suffix variant.
    • The SiP option pairs the die with SPI Flash in one package. That saves board area but commits you to the flash size fixed at order time.
    • Procise is FMSH's own toolchain. Confirm the IP cores and reference designs you depend on exist for this family before committing a new board.

    Common Questions

    How much logic does the FMP100T8 provide?

    106,560 programmable logic cells. The fabric also carries the BRAM and DSP resources listed above.

    What serial connectivity does the FMP100T8 offer?

    8 transceiver channels, each running up to 12.5 Gbps.

    What package is the FMP100T8 in?

    FCBGA676, 27×27 mm. Check the pin-out for the transceiver and HPIO assignment before layout.

    Which EDA toolchain supports the FMP100T8?

    Procise for the FM7 family, Vulture for FM9, and ICraft for FPAI. The PSoC line is supported within the same flow as the FPGA family it derives from.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products