KDS DST1210A SPXO kHz 32.768 kHz 12x1x0.35 Crystal Oscillator

KDS DST1210A SPXO kHz 32.768 kHz 12x1x0.35 Crystal Oscillator

KDS designs the DST1210A as a low-frequency SPXO for industrial automation standby clocks applications where 32.768 kHz reference is needed in a compact 12x1x0.35 footprint. see datasheet supply and Industrial,Automotive coverage suit low-bandwidth wireless timing designs.

Why Choose This Rating

• KDS-manufactured silicon with proven reliability in industrial deployments
• Compatible with mainstream oscillator footprints and land patterns
• Reflow-solder-compatible SMD package for high-volume manufacturing
• 32.768 kHz fundamental reference in a compact 12x1x0.35 SMD package
• Low phase noise and tight frequency stability across Industrial,Automotive temperature range
• Hermetically sealed ceramic package for stable aging behavior

Core Specifications

Best-Fit Applications

• industrial automation standby clocks
• low-bandwidth wireless timing
• Industrial wireless and timing-critical embedded designs
• industrial automation standby clocks with strict frequency accuracy and stability

Selection Guidance

For industrial automation standby clocks designs, confirm the DST1210A frequency stability and phase-noise profile against your receiver acquisition window. The see datasheet supply envelope supports direct interface with common logic families, and the 12x1x0.35 footprint simplifies PCB layout in dense timing chains.

Validate the start-up time and steady-state current draw against your power budget, and confirm the supply-pushing and load-pulling behavior under realistic decoupling conditions. For temperature-sensitive deployments, review the KDS datasheet's stability vs. temperature plot over the full Industrial,Automotive envelope.

Frequently Asked Questions

How does the DST1210A differ from other KDS low-frequency SPXO parts?
The DST1210A uses the 12x1x0.35 SMD package with 32.768 kHz output. Compare against other package sizes and frequency points to find the best fit for your board layout.

Can the DST1210A be used as a direct replacement for similar parts?
In many cases yes. The 12x1x0.35 package and standard 4-pad layout support drop-in replacement across manufacturers. Verify pin-out and supply voltage before substitution.

What is the typical phase noise of the DST1210A?
Phase noise depends on the output frequency and offset. Refer to the KDS datasheet for the DST1210A time-domain and phase-noise plots at the frequencies of interest.

Ordering and Packaging

Series reference: The KDS low-frequency SPXO DST1210A family covers a 32.768 kHz reference in a 12x1x0.35 SMD package. For other frequencies, package sizes, or stability grades, browse the full KDS low-frequency SPXO product line.

Ordering reference: start with DST1210A and confirm the exact reel size, termination finish, and compliance suffix against current stock before purchase.

Design note: Specifications are nominal and based on manufacturer datasheets. Verify the latest KDS data and curves before final release.