MCS1826 3-5.5V Linear Hall-Effect Current Sensor QFN-12

MCS1826 3-5.5V Linear Hall-Effect Current Sensor QFN-12

The MCS1826 is a linear Hall-effect current sensor IC for AC or DC current sensing.

Key Specifications

Features

• 3V to 5.5V Single Supply Options
• Immune to All External Gradient Magnetic Fields by Differential Sensing
• 0.6mΩ Internal Conductor Resistance
• ±5A to ±50A Input Current Range
• 120kHz Bandwidth
• Fast OCD with 1.3µs Response Time
• Output Voltage (VOUT) Proportional to AC or DC Currents
• Ratiometric VOUT from VCC Supply
• Factory-Trimmed for Accuracy
• No Magnetic Hysteresis

Typical Application Circuit

Applications

• Motor Controls
• Audio Driver Current Controls
• Load Detection and Management
• Switch-Mode Power Supplies

Design Notes

• Mechanical tolerance between the magnet and the sensing element translates directly into angle error; budget it before choosing the resolution.
• Match the output interface (SPI, ABZ, PWM or analog) to the MCU timing, including the latency the control loop can tolerate.
• Offset and sensitivity drift over temperature are systematic — a single-point calibration at room temperature will not hold over the operating range.
• Differential or digital outputs survive electrically noisy motor environments far better than single-ended analog ones.

Common Questions