GRX Technology Co, Ltd
MEZS6-35V2AStepperDriver 8-35V, 2.5A Bipolar Stepper Motor Driver Solution Kit Evaluation Board
MEZS6-35V2AStepperDriver 8-35V, 2.5A Bipolar Stepper Motor Driver Solution Kit Evaluation Board

MEZS6-35V2AStepperDriver 8-35V, 2.5A Bipolar Stepper Motor Driver Solution Kit Evaluation Board

Share
pMPS MEZS6-35V2AStepperDriver — Bipolar Stepper Motor Driver Solution Kit, 8-35V input, 2.5 A output./p
    [email protected]
    Previous
    MP2884A Multi-Phase PWM Controller QFN-40
    MPSPower ManagementMotorEvaluation Boards
    • Product Details
    • Download

    MEZS6-35V2AStepperDriver 8-35V, 2.5A Bipolar Stepper Motor Driver Solution Kit Evaluation Board

    The MPS MEZS6-35V2AStepperDriver is an evaluation board built around the MP6501AGF for bench characterisation of the device in its intended topology. It operates from a 8 V to 35 V input and is rated for 2.5 A.

    The MEZS6-35V2AStepperDriver is a stepper motor controller/driver board using the MP6501AGF, a stepper motor driver with a built-in micro-stepping translator.

    Key Specifications

    Part NumberMEZS6-35V2AStepperDriver
    Board ForMP6501AGF
    Board TypeEvaluation / demonstration board
    FunctionBipolar Stepper Motor Driver Solution Kit
    Input Voltage8 V to 35 V
    Current Rating2.5 A
    Ordering CodesMEZS6-35V2AStepperDriver

    Features

    • Wide 8V to 35V Input Voltage Range
    • Up to 2.5A Programmable Output Current
    • Full-, Half-, Quarter-, and Eighth-Step Modes
    • Adjustable Mixed Decay Ratio or Automatic Decay
    • OCP, OVP, and OTP
    • Control Signals Generated by On-Board USB Microcontroller or Supplied Externally

    Evaluation Board

    MEZS6-35V2AStepperDriver evaluation board
    MEZS6-35V2AStepperDriver evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the MEZS6-35V2AStepperDriver support?
    8 V to 35 V. The rated output is 2.5 A.
    What are the defining features of the MEZS6-35V2AStepperDriver?
    Wide 8V to 35V Input Voltage Range Up to 2.5A Programmable Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products

    TOLL TMI31806X 5.5, 6A, 2.4MHz, I2C Programmable Synchronous Buck Converter with WLCSP-20 Package

    TOLL TMI31806X 5.5, 6A, 2.4MHz, I2C Programmable Synchronous Buck Converter with WLCSP-20 Package

    TOLL TMI31806X — synchronous step-down (buck) converter, Compact WLCSP-20, 2.5 V.
    MP23701 4.2-24V, 2A, 1.5MHz Step-Down LED Driver QFN-8

    MP23701 4.2-24V, 2A, 1.5MHz Step-Down LED Driver QFN-8

    MPS MP23701 — Step-Down LED Driver, 4.2-24V input, 2 A output, QFN-8.
    MP62055 2.7-5.5V Single-Channel 500mA Current-Limited Power Distribution Switch TSOT23

    MP62055 2.7-5.5V Single-Channel 500mA Current-Limited Power Distribution Switch TSOT23

    MPS MP62055 — Single-Channel 500mA Current-Limited Power Distribution Switch, 2.7-5.5V input, 500 mA output, TSOT23.
    EV24833-A-N-00A 4.5-55V, 3A White LED Driver Evaluation Board SOIC8E

    EV24833-A-N-00A 4.5-55V, 3A White LED Driver Evaluation Board SOIC8E

    MPS EV24833-A-N-00A — White LED Driver, 4.5-55V input, 3 A output, SOIC8E.
    EVmEZDPD4506A 4-45V Programmable 45V DC/DC Power Supply up to 6A END OF LIFE Evaluation Board

    EVmEZDPD4506A 4-45V Programmable 45V DC/DC Power Supply up to 6A END OF LIFE Evaluation Board

    MPS EVmEZDPD4506A — Programmable 45V DC/DC Power Supply up to 6A END OF LIFE, 4-45V input, 6 A output.
    EV7221-R-00A 4-16V, 80mA LED Driver Evaluation Board QFN-24

    EV7221-R-00A 4-16V, 80mA LED Driver Evaluation Board QFN-24

    MPS EV7221-R-00A — LED Driver, 4-16V input, 80 mA output, 16 channels, QFN-24, AEC-Q100.
    TOLL SIT8997G Li-ion Battery Protection IC for 6 to 7 Cells

    TOLL SIT8997G Li-ion Battery Protection IC for 6 to 7 Cells

    TOLL SIT8997G — li-ion battery protection ic (6-7 cells), 20-pin TSSOP20.
    EVKT-MPX2001-45-PD User Guide MPX2001 Evaluation Kit (EVKT-MPX2001-45-PD) Evaluation Board

    EVKT-MPX2001-45-PD User Guide MPX2001 Evaluation Kit (EVKT-MPX2001-45-PD) Evaluation Board

    MPS EVKT-MPX2001-45-PD — User Guide MPX2001 Evaluation Kit (EVKT-MPX2001-45-PD).
    mEZD71201A-F 4.5-24V, 1A DC/DC Converter QFN3

    mEZD71201A-F 4.5-24V, 1A DC/DC Converter QFN3

    MPS mEZD71201A-F — dc/dc converter, 4.5-24V input, 1A output, QFN3.
    MP4246 4-22V, 6A, 280kHz Buck-Boost Converter QFN-19

    MP4246 4-22V, 6A, 280kHz Buck-Boost Converter QFN-19

    MPS MP4246 — buck-boost converter, 4-22V input, 6A output, 280 kHz, QFN-19.