MID3W2424A 24V Isolated Power Module LGA-6

MID3W2424A 24V Isolated Power Module LGA-6

The MID3W2424A is an 3W, 24V input voltage (VIN), 3kVRMS, isolated DC/DC power module with an integrated transformer.

Key Specifications

Features

• Optimized for 24V ±10% Input Voltage (VIN)
• 1:1 VIN/Output Voltage (VOUT) Ratio
• Up to 3W of Output Power (POUT)
• 500kHz Switching Frequency (fSW)
• 3kVRMS Isolation Test Voltage Hi-Pot Test
• Soft Start (SS), Over-Current Protection (OCP), Input Over-Voltage Protection (OVP), and Over-Temperature Protection (OTP)
• -40°C to +105°C Operating Ambient Temperature (TA)
• EN 62368-1 Compliant
• Available in an LGA-6 (10mmx10mm) Package

Typical Application Circuit

Applications

• Isolated Silicon Carbide (SiC) Gate Drivers
• DC Fast-Charging Stations
• Uninterruptible Power Supplies (UPSs) and Solar Inverters
• Isolated Power Supplies

Design Notes

• The isolation rating is only valid if the PCB keeps the required creepage and clearance across the barrier — the package alone does not guarantee it.
• Common-mode transient immunity matters more than DC withstand in motor and gate-drive applications; check the dV/dt figure.
• Decouple both sides independently, with the capacitor returned to that side's ground.
• Propagation delay and pulse-width distortion set the timing margin in a closed loop.

Common Questions