MP20043 1.2-3.3V, 300mA Linear Regulator With Programmable Output Voltage and Output Discharge QFN8
MP20043 1.2-3.3V, 300mA Linear Regulator With Programmable Output Voltage and Output Discharge QFN8

MP20043 1.2-3.3V, 300mA Linear Regulator With Programmable Output Voltage and Output Discharge QFN8

Share
pMPS MP20043 — Linear Regulator With Programmable Output Voltage and Output Discharge, 1.2-3.3V input, 300 mA output, QFN8./p
    • Product Details
    • Download

    MP20043 1.2-3.3V, 300mA Linear Regulator With Programmable Output Voltage and Output Discharge QFN8

    The MPS MP20043 is a Linear Regulator With Programmable Output Voltage and Output Discharge. It operates from a 1.2 V to 3.3 V input and is rated for 300 mA. It is supplied in a QFN8 package.

    The MP20043 is a dual-channel, low noise, low dropout and high PSRR linear regulator with programmable output voltage.

    Key Specifications

    Part NumberMP20043
    FunctionLinear Regulator With Programmable Output Voltage and Output Discharge
    Input Voltage1.2 V to 3.3 V
    Current Rating300 mA
    PackageQFN8
    Ordering CodesMP20043

    Features

    • Programmable Output Voltage
    • Up to 300mA Output Current (Each LDO)
    • 60mV Dropout at 100mA Load
    • Dual Shutdown Pins Control Each Output
    • 75dB PSRR at 1kHz
    • 7μVRMS Low Noise Output
    • Current Limiting and Thermal Protection
    • Short Circuit Protection
    • Two LDOs in TQFN8 (2mm×2mm) Package
    • Output Load Discharge when Disabled

    Typical Application Circuit

    MP20043 typical application circuit
    MP20043 typical application circuit, as published in the MPS datasheet.

    Applications

    • Cellular Phones
    • Battery-powered Equipment
    • Laptop, Notebook, and Palmtop Computers
    • Hand-held Equipment

    Design Notes

    • Dissipation is (VIN − VOUT) × IOUT. Check it against the package thermal resistance at the real ambient temperature before committing to the full rated current.
    • Some low-noise LDOs require a minimum output capacitor ESR for loop stability — read the stability section before substituting a ceramic part.
    • Add a bypass capacitor on the reference pin where provided; it sets the output noise floor.
    • PSRR falls as the input-to-output differential shrinks, so headroom matters at low VIN.

    Common Questions

    What input voltage does the MP20043 support?
    1.2 V to 3.3 V. The rated output is 300 mA.
    Which package and ordering codes apply to the MP20043?
    QFN8; order codes include MP20043.
    What are the defining features of the MP20043?
    Programmable Output Voltage Up to 300mA Output Current (Each LDO)

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message