Welcome to our company!
MP20142 1.2-3.3V, 200mA Linear Regulator With Programmable Output Voltage and Output Discharge QFN8
Share
pMPS MP20142 — Linear Regulator With Programmable Output Voltage and Output Discharge, 1.2-3.3V input, 200 mA output, QFN8./p
- Product Details
- Download
MP20142 1.2-3.3V, 200mA Linear Regulator With Programmable Output Voltage and Output Discharge QFN8
The MPS MP20142 is a Linear Regulator With Programmable Output Voltage and Output Discharge. It operates from a 1.2 V to 3.3 V input and is rated for 200 mA. It is supplied in a QFN8 package.
The MP20142 is a dual-channel, low noise, low dropout and high PSRR linear regulator with programmable output voltage.
Key Specifications
| Part Number | MP20142 |
| Function | Linear Regulator With Programmable Output Voltage and Output Discharge |
| Input Voltage | 1.2 V to 3.3 V |
| Current Rating | 200 mA |
| Package | QFN8 |
| Ordering Codes | MP20142 |
Features
- Programmable Output Voltage
- Up to 200mA Output Current (Each LDO)
- 60mV Dropout at 100mA Load
- Dual Shutdown Pins Control Each Output
- 75dB PSRR at 1kHz
- 7µVRMS Low Noise Outputs
- Current Limiting and Thermal Protection
- Short Circuit Protection
- Two LDOs in TQFN8 (2mm×2mm) Package
- Output Load Discharge when Disabled
Typical Application Circuit
Applications
- Cellular Phones
- Battery-powered Equipment
- Laptop, Notebook, and Palmtop Computers
- Hand-held Equipment
- Wireless LAN "MPS" and "The Future of Analog IC Technology" are Registered Trademarks of Monolithic Power Systems, Inc.
Design Notes
- Dissipation is (VIN − VOUT) × IOUT. Check it against the package thermal resistance at the real ambient temperature before committing to the full rated current.
- Some low-noise LDOs require a minimum output capacitor ESR for loop stability — read the stability section before substituting a ceramic part.
- Add a bypass capacitor on the reference pin where provided; it sets the output noise floor.
- PSRR falls as the input-to-output differential shrinks, so headroom matters at low VIN.
Common Questions
What input voltage does the MP20142 support?
1.2 V to 3.3 V. The rated output is 200 mA.
Which package and ordering codes apply to the MP20142?
QFN8; order codes include MP20142.
What are the defining features of the MP20142?
Programmable Output Voltage Up to 200mA Output Current (Each LDO)
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
