MP2660 500mA I2C-Controlled Linear Charger WLCSP-9

MP2660 500mA I2C-Controlled Linear Charger WLCSP-9

The MP2660 is a highly integrated, single-cell, Li-ion/Li-polymer battery charger with system power path management for space-limited portable applications.

Key Specifications

Features

• Compatible with 5V USB Power Sources
• Fully Autonomous Charger for Single-Cell Li-Ion/Li-Polymer Batteries
• Complete Power Path Management for Simultaneously Powering the System and Charging the Battery
• Programmable Input Current Limit and Input Minimum Voltage Regulation Thresholds
• ±0.5% Charging Voltage Accuracy
• 13V Maximum Voltage for the Input Source
• I2C Interface for Programming Charging Parameters and Status Reporting
• Fully Integrated Power Switches and No External Blocking Diode Required
• Built-In Robust Charging Protection Including Battery Temperature Monitoring and Programmable Timer
• Built-In Battery Disconnection Function for Shipping Mode

Typical Application Circuit

Applications

• Wearable Devices
• Smart Handheld Devices
• Fitness Accessories
• Smart Watches

Design Notes

• Charge current accuracy depends on the sense resistor tolerance, so use a 1% or better part and keep its traces Kelvin-connected.
• Wire the NTC input for JEITA profile control if the pack is charged over temperature.
• Set the input current limit to what the adapter can actually deliver; a limit above the adapter rating causes the input rail to collapse mid-charge.
• Termination current and recharge threshold dominate cycle life in shallow-cycling products.

Common Questions