GRX Technology Co, Ltd
MP6215 2.7-5.5V Single-Channel 1.5A Current-Limited Power Distribution Switch MSOP8
MP6215 2.7-5.5V Single-Channel 1.5A Current-Limited Power Distribution Switch MSOP8

MP6215 2.7-5.5V Single-Channel 1.5A Current-Limited Power Distribution Switch MSOP8

Share
pMPS MP6215 — Single-Channel 1.5A Current-Limited Power Distribution Switch, 2.7-5.5V input, 1.5 A output, MSOP8./p
    [email protected]
    Previous
    MP62160 2.7-5.5V Single-Channel 2A Current-Limited Power Distribution Switch QFN8
    MPSMSOP8Power ManagementAnalog ICs
    • Product Details
    • Download

    MP6215 2.7-5.5V Single-Channel 1.5A Current-Limited Power Distribution Switch MSOP8

    The MPS MP6215 is a Single-Channel 1.5A Current-Limited Power Distribution Switch. It operates from a 2.7 V to 5.5 V input and is rated for 1.5 A. It is supplied in a MSOP8 package.

    The MP6215 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions.

    Key Specifications

    Part NumberMP6215
    FunctionSingle-Channel 1.5A Current-Limited Power Distribution Switch
    Input Voltage2.7 V to 5.5 V
    Current Rating1.5 A
    Quiescent Current140 µA
    PackageMSOP8
    Ordering CodesMP6215

    Features

    • 1.5A Continuous Current
    • Accurate Current Limit
    • 2.7V to 5.5V Supply Range
    • 140uA Quiescent Current
    • Thermal-Shutdown Protection
    • Under-Voltage Lockout
    • 8ms FLAG Deglitch Time
    • No FLAG Glitch During Power Up
    • Reverse Current Blocking

    Typical Application Circuit

    MP6215 typical application circuit
    MP6215 typical application circuit, as published in the MPS datasheet.

    Applications

    • Notebook PC
    • Set-top-box
    • Telecom and Network Systems
    • PC Card Hot Swap
    • USB Power Distribution "MPS" and "The Future of Analog IC Technology" are Trademarks of Monolithic Power Systems, Inc.

    Design Notes

    • Check the input common-mode range against the actual signal, especially in single-supply rails where ground-referenced signals sit at the edge.
    • Capacitive load drives stability; add series isolation when driving cables or ADC inputs directly.
    • Offset voltage and its drift, not gain bandwidth, usually set the achievable accuracy in DC instrumentation.
    • Decouple at the pin with the smallest package capacitor that meets the transient requirement, returned to a local ground.

    Common Questions

    What input voltage does the MP6215 support?
    2.7 V to 5.5 V. The rated output is 1.5 A.
    Which package and ordering codes apply to the MP6215?
    MSOP8; order codes include MP6215.
    What are the defining features of the MP6215?
    1.5A Continuous Current Accurate Current Limit

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products

    EVQ6527-F-00A 5.5-40V, 0.8A Deca Half-Bridge Motor Driver Evaluation Board TSSOP28

    EVQ6527-F-00A 5.5-40V, 0.8A Deca Half-Bridge Motor Driver Evaluation Board TSSOP28

    MPS EVQ6527-F-00A — Deca Half-Bridge Motor Driver Evaluation Board, 5.5-40V input, 0.8 A output, TSSOP28, AEC-Q100.
    MPC22165-170 4-16V 170A, 2-Phase Intelli-PhaseTM Power Module LGA-72

    MPC22165-170 4-16V 170A, 2-Phase Intelli-PhaseTM Power Module LGA-72

    MPS MPC22165-170 — 170A, 2-Phase Intelli-PhaseTM Power Module, 4-16V input, 170 A output, LGA-72.
    mEZD72401A-B 4.5-36V, 1A DC/DC Converter QFN-16

    mEZD72401A-B 4.5-36V, 1A DC/DC Converter QFN-16

    MPS mEZD72401A-B — dc/dc converter, 4.5-36V input, 1A output, QFN-16.
    MPQ4242B-AEC1 4.8-36V, 5A Fully Integrated USB PD Solution QFN-22

    MPQ4242B-AEC1 4.8-36V, 5A Fully Integrated USB PD Solution QFN-22

    MPS MPQ4242B-AEC1 — Fully Integrated USB PD Solution, 4.8-36V input, 5 A output, QFN-22, AEC-Q100.
    MP1499 4.5-16V, 5A, 500kHz Step-Down Converter QFN10

    MP1499 4.5-16V, 5A, 500kHz Step-Down Converter QFN10

    MPS MP1499 — step-down converter, 4.5-16V input, 5A output, 500 kHz, QFN10.
    Chipanalog CA-IF4850FD Interface IC

    Chipanalog CA-IF4850FD Interface IC

    The CA-IF48xx family of devices are low-power transceivers for RS-485/RS-422 communications in harsh environments. All devices have ±30V fault protection for overvoltage conditions on the bus lines that ensure robust pro
    TBMAQ473-Q-LT-01A Test Board Evaluation Board

    TBMAQ473-Q-LT-01A Test Board Evaluation Board

    MPS TBMAQ473-Q-LT-01A — Test Board.
    EV5921-V-01A 4-16V 16V,50A,1mΩ (Rds_on) HOT-SWAP INTELLI-FUSE SOLUTION Evaluation Board

    EV5921-V-01A 4-16V 16V,50A,1mΩ (Rds_on) HOT-SWAP INTELLI-FUSE SOLUTION Evaluation Board

    MPS EV5921-V-01A — 16V,50A,1mΩ (Rds_on) HOT-SWAP INTELLI-FUSE SOLUTION, 4-16V input, 50 A output.
    MPQ2022A-AEC1 1-13.6V, 300mA Dual-Channel LDO QFN-16

    MPQ2022A-AEC1 1-13.6V, 300mA Dual-Channel LDO QFN-16

    MPS MPQ2022A-AEC1 — Dual-Channel LDO, 1-13.6V input, 300 mA output, QFN-16, AEC-Q100.
    Chipanalog CA-IS3050W Isolated Interface IC

    Chipanalog CA-IS3050W Isolated Interface IC

    The CA-IS305x family of devices is galvanically-isolated ontroller area network (CAN) transceiver that has superior isolation and CAN performance to meet the needs of the ndustrial applications. All devices of this famil