MP6513L 2.5-5.5V, 0.6A H-Bridge Motor Driver in a TSOT23-6

Product

MP6513L 2.5-5.5V, 0.6A H-Bridge Motor Driver in a TSOT23-6

Share

pMPS MP6513L — H-Bridge Motor Driver in a TSOT23-6, 2.5-5.5V input, 0.6 A output, TSOT23./p

[email protected]

MPS TSOT23 Power Management Motor Drivers & Controllers Motor

Product Details
Download

MP6513L 2.5-5.5V, 0.6A H-Bridge Motor Driver in a TSOT23-6

The MPS MP6513L is a H-Bridge Motor Driver in a TSOT23-6. It operates from a 2.5 V to 5.5 V input and is rated for 0.6 A. It is supplied in a TSOT23 package.

The MP6513L is an H-bridge motor driver used for driving reversible motors, which can drive one DC motor, one winding of a stepper motor, or other loads.

Key Specifications

Part Number	MP6513L
Function	H-Bridge Motor Driver in a TSOT23-6
Input Voltage	2.5 V to 5.5 V
Current Rating	0.6 A
Package	TSOT23
Ordering Codes	MP6513L

Features

Wide 2.5V to 5.5V Operating Input Range
0.6A Maximum Output Current
Low MOSFET On Resistance (HS: 500mΩ; LS: 500mΩ)
Forward, Reverse, Coast, or Brake Output Modes
Low Standby Circuit Current when Inputs 1 and 2 are Both Low
Thermal Shutdown
Internal Charge Pump
Cycle-by-Cycle Over-Current Protection (OCP)
Short-Circuit Protection (SCP)
Available in a TSOT23-6 Package

Typical Application Circuit

Applications

Consumer Products

Design Notes

Set dead time to match the external FET turn-off, not the datasheet typical. Too little risks shoot-through, too much distorts the current waveform at low duty cycle.
Use a Kelvin connection for the current-sense resistor; shared copper injects switching noise straight into the sense amplifier.
The thermal pad is the only heat path for most packages — via-stitch it to a ground plane with at least 9 vias.
PWM frequency trades switching loss against current ripple in the motor inductance; 20 kHz keeps the drive out of the audible band.
Add a brake or coast path so regeneration during a fast stop does not pump the supply rail.