Welcome to our company!
MPQ6530-AEC1 5-60V Brushless DC Motor Pre-Driver QFN-28
Share
pMPS MPQ6530-AEC1 — Brushless DC Motor Pre-Driver, 5-60V input, QFN-28, AEC-Q100./p
- Product Details
- Download
MPQ6530-AEC1 5-60V Brushless DC Motor Pre-Driver QFN-28
The MPS MPQ6530-AEC1 is a Brushless DC Motor Pre-Driver. It operates from a 5 V to 60 V input. It is supplied in a QFN-28 package. The part is AEC-Q100 qualified.
The MPQ6530 is a gate driver IC designed for three-phase brushless DC (BLDC) motor driver applications.
Key Specifications
| Part Number | MPQ6530-AEC1 |
| Function | Brushless DC Motor Pre-Driver |
| Input Voltage | 5 V to 60 V |
| Package | QFN-28 |
| Qualification | AEC-Q100 |
| Ordering Codes | MPQ6530-AEC1 |
Features
- Charge Pump Gate Drive Supply
- Bootstrap (BST) High-Side MOSFET (HS- FET) Driver with Trickle-Charge Circuit to Support 100% Duty Cycle Operation
- Low-Power Sleep Mode
- Configurable Short-Circuit Protection (SCP)
- Over-Current Protection (OCP)
- Adjustable Dead-Time (DT) Control to Prevent Shoot-Through
- Thermal Shutdown
- Under-Voltage Lockout (UVLO) Protection
- Fault Indication Output
- Thermally Enhanced Surface-Mount Package
Typical Application Circuit
Applications
- Three-Phase Brushless DC (BLDC) Motors and Permanent Magnet Synchronous Motors (PMSMs)
Design Notes
- Set dead time to match the external FET turn-off, not the datasheet typical. Too little risks shoot-through, too much distorts the current waveform at low duty cycle.
- Use a Kelvin connection for the current-sense resistor; shared copper injects switching noise straight into the sense amplifier.
- The thermal pad is the only heat path for most packages — via-stitch it to a ground plane with at least 9 vias.
- PWM frequency trades switching loss against current ripple in the motor inductance; 20 kHz keeps the drive out of the audible band.
- Add a brake or coast path so regeneration during a fast stop does not pump the supply rail.
Common Questions
What input voltage does the MPQ6530-AEC1 support?
5 V to 60 V.
Which package and ordering codes apply to the MPQ6530-AEC1?
QFN-28; order codes include MPQ6530-AEC1.
What are the defining features of the MPQ6530-AEC1?
Charge Pump Gate Drive Supply Bootstrap (BST) High-Side MOSFET (HS- FET) Driver with Trickle-Charge Circuit to Support 100% Duty Cycle Operation
Is the MPQ6530-AEC1 qualified for automotive designs?
Yes — it is AEC-Q100 qualified. Confirm the grade against the qualification summary in the datasheet before specifying it on a safety-related rail.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
