OB2510GL Offline PSR Controller

OB2510GL is a high performance offline PSR controller for low power AC/DC charger and adapter applications. It operates in primary-side sensing and regulation. Consequently, opto-coupler and TL431 could be eliminated. Proprietary Constant Voltage (CV) and Constant Current (CC) control is integrated as shown in the figure below. In CC control, the current and output power setting can be adjusted externally by the sense resistor Rs at CS pin. In CV control, multi-mode operations are utilized to achieve high performance and high efficiency. In addition, good load regulation is achieved by the built-in cable drop compensation. Device operates in PFM in CC mode as well at large load condition and it operates in PWM with frequency reduction at light/medium load. The chip consumes very low operation current, it can achieve less than 75mW standby power. OB2510GL offers comprehensive protection coverage with auto-recovery features including Cycle-by-Cycle current limiting, VDD over voltage protection, short circuit protection, built-in leading edge blanking, VDD under voltage lockout (UVLO), OTP etc. OB2510GL is offered in SOT23-5 package

Key Features

• Primary-side Sensing and Regulation Without TL431 and Opto-coupler
• High Precision Constant Voltage and Current Regulation at Universal AC Input
• Multi-mode PWM/PFM operation for efficiency improving
• Good dynamic response
• Programmable CV and CC Regulation
• Built-in Line Voltage and Primary Winding Inductance Compensation
• Programmable Cable Drop Compensation
• No Need For Control Loop
• Compensation
• Audio Noise Free Operation
• Drive BJT Switch
• Built-in Leading Edge Blanking (LEB)
• Comprehensive Protection Coverage with auto-recovery
• VDD Over Voltage Protection

Applications

• Low Power AC/DC offline SMPS for
• Cell Phone Charger
• Digital Cameras Charger
• Small Power Adapter
• Auxiliary Power for PC, TV etc.
• Linear Regulator/RCC Replacement

Part Numbers and Specifications

Product family: On-Bright official page