S500-500-R 500 mA 250 Vac Fast-Acting Glass Cartridge Fuse
S500-500-R 500 mA 250 Vac Fast-Acting Glass Cartridge Fuse

S500-500-R 500 mA 250 Vac Fast-Acting Glass Cartridge Fuse

Share
pEaton S500-500-R — 500 mA, 250 V, fast-acting glass cartridge fuse, 35 A at 250 Vac interrupting./p
    • Product Details
    • Download

    S500-500-R 500 mA 250 Vac Fast-Acting Glass Cartridge Fuse

    S500-500-R 500 mA 250 Vac Fast-Acting Glass Cartridge Fuse belongs to the the maker range. It carries 500 mA, rated 250 Vac, uses a fast-acting element, in a glass body.

    Technical Data

    ParameterRating
    Part numberS500-500-R
    Rated current500 mA (1/2 A)
    BodyGlass tube, 5 x 20 mm
    Elementsingle element
    Typical DC cold resistance0.26 Ω
    Breaking capacity35 A at 250 Vac, 290 A and 1,500 A on the higher ratings
    Voltage rating250 Vac
    AC interrupting rating35 A at 250 Vac
    Maximum voltage drop220 mV
    Typical melting I2t0.18 A²s
    End capssilver-plated 32-125 mA, nickel-plated above
    Design standardIEC 60127-2

    Design Notes

    • Interrupting capability is 35 A at 250 Vac — confirm the circuit's prospective fault current stays below this.
    • Fast element suits resistive and semiconductor loads rather than motors with high inrush.
    • Because it opens within milliseconds, downstream semiconductors see less let-through energy.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 500 mA to stop nuisance trips — fix the cause instead.

    Where It Is Used

    Typical places this fuse turns up:

    • EV

    Common Questions

    What are the ratings of the S500-500-R?

    500 mA continuous at 250 Vac, interrupting rating 35 A at 250 Vac.

    Is the S500-500-R fast-acting or time-delay?

    It is fast-acting. Expect it to open quickly on overload.

    Can the S500-500-R be used on a higher fault-current circuit?

    No — its interrupting rating is 35 A at 250 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products